Chamberlain manufactures garage door openers under several brand names. The safety sensors we offer are mostly interchangeable even though the part numbers may vary from brand to brand. Click here to see the Chamberlain brands.

This page displays TriCode Compatible Garage Door Opener safety sensors, TriCode Compatible safety sensors, TriCode Compatible 41A4373A safety sensor kit, TriCode Compatible 41A6569 safety sensor brackets, TriCode Compatible 41A5034, TriCode Compatible 41A5266-1, TriCode Compatible 41A5281, TriCode Compatible 41B873, TriCode Compatible CPS-U commersial door operator protector system, TriCode Compatible CPS-UN4, TriCode Compatible 41K4629 protector system interface box, 41A6569 safety sensor brackets, 35265B 2 conductor wire, 34545R insulated staples, and 41B4115 garage door opener pigtail connectors that are for sale, in stock, and ready to ship.

To aid in your purchase of TriCode Compatible products, please Contact Us.

See all repair parts

41A4373A Discontinued USE 41A4373A/41A5034

Liftmaster Garage Door Opener Safety Sensor Kit Model 41A4373ALiftmaster Garage Door Opener Safety Sensor Kit Model 41A4373A

$48.95


Safety Sensor Kit

41A5034

Liftmaster Garage Door Opener Safety Sensor Kit (New Style) Model 41A5034 $32.95


Garage Door Opener Safety Sensors

41A6569

Garage Door Opener Sensor Brackets $24.00



Sensor Brackets


  • This applies to 41A4373A/41A5034 above:
  • Compatible with LiftMaster and Chamberlain Brand garage door openers 1993 thru 1997
  • One green light one yellow light.
  • Each sensor shown includes approximately 18" of wire attached. Designed to splice into your existing wires. Wire connectors, 41A5266-1 brackets and installation instructions.
  • Extension brackets are part number 41A5281 sold separately.
  • This applies to 41A5034 above:
  • Compatible with LiftMaster and Chamberlain Brand garage door openers 1997 thru current
  • NO brackets (only sensors); use 41A5266-1 below
  • One green light and one yellow light
  • Each sensor shown has approximately 18" of wire attached. Designed to splice into your existing wires. Wire connectors included
  • Fits 41A5266-1 brackets pictured below
  • Will NOT fit brackets that the 41A4373A Sensors use
  • "Recommended Surge Protection when replacing safety sensors or circuit boards"
  • This applies to 41A6569 above:
  • For 41A4373A safety sensors - shown on the left
  • Includes 1 pair of brackets and fasteners

41A5266-1

41A5266-1 Lift master Garage Door Openers Brackets for Snappy Sensors $15.00



Garage Door Opener Safety Sensor Brackets for 41A5034 Sensors

41B873

LiftMaster Chamberlain Sears Craftsman Garage Door Opener Safety Sensor Sun Shields 41B873 $10.00



Garage Door Opener Safety Sensor Sun Shields

41A5281

Liftmaster Chamberlain Sears Craftsman Garage Door Opener Extension Brackets for 41A5266-1 Snappy Brackets 41A5281 $9.00



Garage Door Opener Extension Brackets for 41A5266-1 Brackets


  • This applies to 41A5266-1 above:
  • Compatible with LiftMaster and Chamberlain Brand garage door openers 1997 thru current
  • FOR use with 41A5034 style sensors ONLY
  • This applies to 41B873 above:
  • LiftMaster, Chamberlain, Sears Craftsman, and Chamberlain Brand garage door opener safety sensor sun shields
  • These safety sensor sun shields are used to prevent sunlight from shining into sensor causing accidental reversal of garage door
  • ONLY compatible with 41A5266-1 safety sensor brackets pictured above
  • Includes one pair
  • This applies to 41A5281 above:
  • Allows for flexibility in installation of 41A5266-1 brackets above

CPS-U

LiftMaster Commercial Door Operator Commercial Protector System


$94.50


Commercial Door Operator Protector System

41K4629

Garage Door Opener Screw Drive Lubricant  LUBE7 $54.75



Protector System Interface Box

CPS-UN4

CPS LiftMaster Commercial Door Operator Protector System $147.50


Commercial Door Operator Protector System


  • This applies to CPS-U above:
  • For use with models CPS, CPSll, CPS-L and CPS-U
  • Direct connect commercial protector system for Logic Control
  • Provides protection for doors up to 30ft wide
  • For use with the Logic Control Board Version 2 only
  • If using multiple sets of photo eyes on one Logic operator, use CPS-U for lowest position and CPS for every other position
  • ONLY use with LiftMaster commercial door operators
  • Includes emitter, receiver, mounting brackets, "C" wrap, wire, necessary hardware, installation manual
  • This applies to 41K4629 above:
  • Replacement Interface Box
  • Used with CPS Protector Systems
  • Included with CPS Protector System - shown above
  • For use on LiftMaster and Link commercial door operators only
  • This applies to CPS-UN4 above:
  • Commercial Protector System provides protection on doors up to 30 feet wide
  • For use on LiftMaster commercial door operators only
  • Provides protection for doors up to 30ft wide
  • Includes emitter, receiver, mounting brackets, "C" wrap, wire, fasteners, and installation instructions

41A6569

Safety Sensor Brackets $24.00

Chamberlain Sears Craftsman Safety Sensor Brackets
• For CPS and CPS-U sensors - shown above
• Includes 1 pair of brackets and fasteners

34545R

Insulated Staples $4.00


Insulated Staples

• 30 insulated staples with 2 screws
• Used for mounting wall button and safety sensors wiring

35265B

Garage Door Opener Wire $12.95


Wire 2 Conductor

• 90' spool, 2 conductor wire for damaged wire repair
• For use with wall buttons or safety sensors


41B4115

Liftmaster Garage Door Opener Pigtail Connectors Model 41B4115 $11.95

NO LONGER AVAILABLE

Chamberlain Sears Craftsman Garage Door Opener Pigtail Connectors

Use replacement sensors 41A4373A shown above to make your repair.





Contact Us


We invite your inquiries regarding your garage door opener.

  • For technical and compatibility issues, we must know the brand and model of your opener to help
  • Be sure to include your complete and accurate email address with your inquiry
Name A value is required.
Email Address (accurate) A value is required.Invalid format.
Phone No.
Brand of Opener
Model Number of Opener
(located on motor head behind light bulb cover)
Model Number of Remote Control
(located on back of remote)
Model/Part Number of Current Receiver
(located on Receiver)
Enter Security Code

Comments:


garage-door-opener-parts.com - Owned by 1st Garage Door Openers, Inc., an independent family owned and operated business serving the Garage Door and Garage Door Opener Industry since 1981. Providing excellent customer service and assistance for over 25 years. We are a discount reseller of garage door opener remotes, repair parts, keyless entry and gate operator controls for your home, business, or gated community. We carry parts for the following garage door openers: Lift-Master, Chamberlain, Sears Craftsman, Access Master, Sears Best Craftsman, Sears Automatic Door Opener, Master Mechanic, Security +, Formula 1, Garage Master, Billion Code, LiftMaster Professional, Estate Series, Premium Series, Contractor Series, Power Driver, Whisper Drive, Genie, Alliance, Norelco, Blue-Max, Lift-A-Door, Pro Max, Hercules, Stealth, Excelerator, Intellicode, Genie Pro, OverDrive, Python 2, Signature, Phantom, Legacy, Medallion, CodeDodger, Overhead Door, Genie Shop Vac, Stanley, Vemco, Quiet Glide, SecureCode, Lightmaker, Innovative Products, Whistler, U-Install, Popular Mechanics, Allister, Allstar, Pulsar, MVP, Challenger, GTO, All-O-Matic, Electrolift, Westinghouse, AM/11, Linear, Access Pro, Moore-O-Matic, MegaCode, Delta 3, MultiCode, Heddolf, ESP Micom, Intercontinental Dynamics, Crusader, Wayne Dalton, iDrive, Door Master, Quantum, Classic Drive, Tec Key, Martec, Monarch, Telectron and other garage door openers, and gate operators. Brand names of Garage Door openers are registered trade names of the respective entities and are only used for reference.